People

Current Graduate Students

  1. Uribe-Quintero, Everardo, Flight Dynamics of High Speed Aircraft

Former Graduate Students – Masters Thesis Students

  1. Iyer, Arvind, M.S. thesis, “Reexamining Busemann’s Wing Sweep Theory and Implications on Leading Edge Tubercles,” Arizona State University, Tempe, AZ, October 2024. (co-advised with Prof. Werner Dahm) (Initial career placement: Honeywell, Phoenix, AZ)
  2. Valenzuela, Jose V., M.S. thesis, “Aerodynamic Nuances of Wings Subjected to Ground Effect,” Arizona State University, Tempe, AZ, February 2024. (Initial career placement: Grand Canyon University, Phoenix, AZ)
  3. Ratnayake, Sajana S., M.S. thesis, “Use of Potential Flow Solvers for Automobile Racing Applications,” Arizona State University, Tempe, AZ, November 2023. (Initial career placement: Mechanical/Thermal Test Engineer at Akkodis – on-site at HP, Denver, CO)
  4. Lorenzo, William P., M.S. thesis, “Fundamental Assessment of High-Speed Aircraft Stability and Control from Historic Flight Tests,” Arizona State University, Tempe, AZ, November 2023. (Initial career placement: United States Air Force AFIT, Dayton, OH)
  5. Heinz, Joshua H., M.S. thesis, “Attainable Moment Sets – Approaches to Understanding Trim Capability in Conceptual Design,” Arizona State University, Tempe, AZ, August 2023. (Initial career placement: Lockheed Martin Skunk Works, Palmdale, CA)
  6. Hoopes, Connor S., M.S. thesis, “Increasing Lateral-Directional Controllability and Investigating Elevator-Body Flap Interaction for Shuttle Orbiter,” Arizona State University, Tempe, AZ, April 2023.  (Initial career placement: Northrop/Grumman, Chandler, AZ)
  7. O’Brien, Kevin P., M.S. thesis, “Open Loop Stability & Control Screening of High-Speed Slender Aircraft,” Arizona State University, Tempe, AZ, April 2023.  (Initial career placement: Northrop/Grumman, Chandler, AZ)
  8. Webb, Benjamin, M.S. thesis, “The Effects of Static Aeroelastic Properties on Aircraft Performance and Shockwave Formation,” Arizona State University, Tempe, AZ, November 2022. (Initial career placement: NASA/Ames Research Center, Moffett Field, CA)
  9. Griffin, Jack, A. M.S. thesis, “A “Mission Code” Approach to Conceptual Design of Hypersonic Vehicles,” Arizona State University, Tempe, AZ, April 2022. (Initial career placement: United States Air Force AFIT, Dayton, OH)
  10. Blair, Martin. M.S. thesis, “Conceptual Composite Wing Design,” Arizona State University, Tempe, AZ, July 2021.
  11. Souders, T.J. M.S. thesis, “Modernization of a Vortex-Lattice Method with Aircraft Design Applications,” Arizona State University, Tempe, AZ, April 2021. (Initial career placement: PhD Student, University of Colorado, Boulder, CO)
  12. Martinez-Rodriguez, Gabino. M.S. thesis, “A Study and Design of Multi-Element High Lift Systems for Commercial Transport Aircraft,” Arizona State University, Tempe, AZ, April 2021. (Initial career placement: Nammo-Talley, Phoenix, AZ  now at NASA/Langley Research Center, Hampton, VA)
  13. Plaban, Punya. M.S. thesis, “Revisiting Aerodynamic Modifications to a Thin Transonic Wing & Küchemann’s Critical Pressure Co-efficient Rule,” Arizona State University, Tempe, AZ, April 2021. (Initial career placement: Skyroot Aerospace, Hyderabad, India. Now PhD student at Penn State)
  14. Armenta, Francisco X., Jr., M.S. thesis, “Revisiting the Transonic Area Rule for Conceptual Aerodynamic Design,” Arizona State University, Tempe, AZ, April 2021. (Initial career placement: Boeing, Everett, WA)
  15. Chaudhari, Bhargav, M.S. thesis, “Assessing Flight Performance of a Supersonic Airliner with Swing Wing Capabilities using Energy Maneuverability Theory,” Arizona State University, Tempe, AZ, April 2021. (Initial Career Placement: Aabott Laboratories, Minneapolis, MN)
  16. Kurus, Noah J., M.S. thesis, “An Exploration into the Nuances of Supersonic Transport Design,” Aerospace Engineering, Arizona State University, Tempe, AZ, November 2020. (Initial career placement: Honeywell, Phoenix, AZ  now at Northrop Grumman, Chandler, AZ)
  17. Gadekar, Vipul P., M.S. thesis, “Design of Wings for Jump Gliding in a Biped Robot,” Aerospace Engineering, Arizona State University, Tempe, AZ, August 2020. (Co-Advised with Prof. Daniel Aukes) (Initial career placement: Whisper Aero)
  18. Thomas, Philip R., M.S. thesis, “Aircraft are not Fair-Weather Friends: An Analysis of Aircraft En-Route Performance and Economy with Real-World Atmospheric Conditions,” Aerospace Engineering, Arizona State University, Tempe, AZ, November 2019. (Initial career placement: Engineering Research and Consulting, Inc. Contractor at Eglin AFB, FL)
  19. Burgett, Luke M.S. thesis, “Comparison of Traditional Two-Spool and Three-Spool with Vaneless Counter-Rotating Low-Pressure Turbine for Aircraft Propulsion Power Extraction,” Aerospace Engineering, Arizona State University, Tempe, AZ, April 2019. (Initial career placement: Williams International, Walled Lake, MI)
  20. Ou, Che Wei, M.S. thesis, “The Effect of Leading-Edge Geometry on the Induced Drag of a Finite Wing,” Aerospace Engineering, Arizona State University, Tempe, AZ, April 2019. (Initial career placement: National Chung-Shan Institute of Science & Technology, Lung-Tan, Tao-Yuan, Taiwan, R.O.C.)
  21. Miskin, Daniel L., M.S. thesis, “Early Wing Structural Design for Stiffness and Frequency Response,” Aerospace Engineering, Arizona State University, Tempe, AZ, November 2018. (Initial career placement: Raytheon Missile Systems, Tucson, AZ)
  22. Raines, Taylor, M.S. thesis, “Propellant Mass Scaling and Decoupling and Improved Plasma Coupling in a Pulsed Inductive Thruster,” Aerospace Engineering, Arizona State University, Tempe, AZ, June 2018. (Co-advisor with Daniel B. White) (Initial career placement: General Atomics, San Diego, CA)
  23. Delisle, Mathew, M.S. thesis, “Destabilized Aircraft Response: The Implications of Pilot Trim Error,” Aerospace Engineering, Arizona State University, Tempe, AZ, April 2018. (Initial career placement: Boeing Commercial Aircraft, Everett, WA)
  24. Cleary, Spencer, M.S. thesis, “The Supersonic Performance of High Bypass Ratio Turbofan Engines with Fixed Conical Spike Inlets,” Aerospace Engineering, Arizona State University, Tempe, AZ, April 2018. (Initial career placement: Boeing, Huntington Beach, CA)
  25. Wilson, John R., M.S. thesis, “The Doghouse Plot: History, Construction Techniques, and Application,” Aerospace Engineering, Arizona State University, Tempe, AZ, November 2017 *winner of The Fall 2017 ASU Outstanding Engineering Graduate Student award (Initial career placement: Orbital Sciences, Chandler, AZ)
  26. Wood, Donald L., M.S. thesis, “Experimental Investigation of Typical Aircraft Field Performance Versus Predicted Performance Targets,” Aviation Management Technology (co-advised with Mary Niemczyk), Arizona State University, Tempe, AZ, May 2017. (Initial career placement: Academic Professional, Arizona State University, Mesa, AZ now with Boeing Military Aircraft, Oklahoma City, OK)
  27. Beard, John E., M.S. thesis, “Takeoff Obstacle Clearance Procedures: The Feasibility of Extended Second Segment Climb,” Aerospace Engineering, Arizona State University, Tempe, AZ, April 2017. (Initial career placement: Raytheon Missile Systems, Tucson, AZ) * runner up for the 2017 Outstanding SEMTE Graduate Thesis award
  28. Anderson, Benjamin K., M.S. thesis, “Conceptual Fuselage Design with Direct CAD Modeling,” Aerospace Engineering, Arizona State University, Tempe, AZ, April 2017. (Initial career placement: Textron Aviation, Wichita, KS)
  29. Verbin, A.J., M.S. thesis, “Detail Design of a Pulsed Plasma Test Stand,” Aerospace Engineering, Arizona State University, Tempe, AZ, April 2017. (Initial career placement: Raytheon Missile Systems, Tucson, AZ)
  30. Hadder, Eric, M.S. thesis, “Predicting Minimum Control Speed On The Ground (VMCG) And Minimum Control Airspeed (VMCA) Of Engine Inoperative Flight Using Aerodynamic Database And Propulsion Database Generators,” Aerospace Engineering, Arizona State University, Tempe, AZ, November 2016. (Initial career placement: Earth Air, Mesa, AZ)
  31. Kirkman, Jeffrey J., M.S. thesis, “Transonic Flow Around Swept Wings: Revisiting Von Karman’s Similarity Rule,” Aerospace Engineering, Arizona State University, Tempe, AZ, April 2016. (Initial career placement: Textron Aviation, Wichita, KS, now with Lockheed Martin, Ft Worth, TX)
  32. Heitzman, Nicholas, M.S. thesis, “Comparison of Commercial Aircraft Fuel Requirements in Regards to FAR, Flight Profile Simulation, and Flight Operational Techniques,” Aerospace Engineering, Arizona State University, Tempe, AZ, April 2014. (Initial career placement: Honeywell, Phoenix, AZ)

Former Graduate Students – Applied Project Students

  1. Bryan, B., Flying Qualities of Bell X-1E Rocket Plane, Arizona State University, December 2025.
  2. Kulkarni, A., Bell Shaped Lift Distributions, Arizona State University, December 2023.
  3. Puentes, O., Transonic Aerodynamics of Raked Wingtips and Winglets, Arizona State University, May 2023. (Civilian at USAF Luke AFB)
  4. Ratnayake, S.. Three-Dimensional Geometry Synthesis to Achieve a Wing Target Pressure Distribution, Arizona State University, May 2020.
  5. Frede, K., Engine Installation Interference Effects on a Transonic Wing, Arizona State University, Tempe, AZ, May 2019. (Initial career placement: Northrop Grumman, Chandler, AZ)
  6. Shillingburg, Ryan. Hypersonic Vehicle Aerodynamic Configuration Studies, Arizona State University, Tempe, AZ, May 2019. (Initial career placement: Raytheon Missile Systems, Tucson, AZ)
  7. Snodgrass, N. High Speed Propulsion, Arizona State University, Tempe, AZ, December 2018. (Initial career placement: General Dynamics, Tempe, AZ)
  8. McCourt, Anthony. Materials Selection and Structural Design for a Hybrid Rocket Combustion Chamber, Arizona State University, Tempe, AZ, May 2018. (Initial career placement: Honeywell, Phoenix, AZ)
  9. Leader, Robert. High-Bypass Ratio Turbofan Engine Design Studies, M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2018. (Initial career placement: Honeywell, Phoenix, AZ)
  10. Winsryg, Benjamin. Aerothermal Environments Developed By High Speed Atmospheric Flight. M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2018. (Initial career placement: Lockheed Martin Space Systems, Denver, CO)
  11. Stone, Nathan. Power and bleed air extraction from small commercial turbofan engines intended to power HALE aircraft. M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2018. (Initial career placement: General Atomics Aeronautical Systems, Adelanto, CA) *winner of the Spring 2018 SEMTE Outstanding Graduate TA award
  12. Garnica, Isaac. Power and bleed air extraction from single and multi-shaft turbofan engines. M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2016. (Initial career placement: Honeywell, Phoenix, AZ)
  13. Allyn, Mathew. Wing structural design consequences of active load alleviation. M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, December 2015. (Initial career placement: Boeing Commercial Airplane Company, Seattle, WA)
  14. Quackenbush, Jess, Induced Drag of Sharp Leading Edge Wings. M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, December 2015. (Initial career placement: Orbital Sciences, Chandler, AZ)
  15. Palma, Ryan M., Inlet / Engine Matching for Supersonic Turbofan Engines. S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, December 2015. (Initial career placement: Raytheon Missile Systems, Tucson, AZ)
  16. Swann, Matthew, Flight Dynamics Screening Tools. M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2015. (Initial career placement: Raytheon Missile Systems, Tucson, AZ)
  17. Dickmann, Christopher A., Installed Performance Modelling of Supersonic Normal Shock Engines using NPSS. M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2015. (Initial career placement: Northrop/Grumman, El Segundo, CA)
  18. Jensen, James C., Spanwise Effects of Wing Thickness. M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2015. (Initial career placement: NASA/Ames Research Center, Moffett Field, CA)
  19. Barchfield, Christopher A., Induced Drag of Low Aspect Ratio Wings. M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2015.
  20. Merrell, Michael Q., Peakey Leading Edge Airfoil Design M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2015. (Initial career placement: Raytheon Missile Systems, Tucson, AZ)
  21. Kamat, Sagar. Wing Speed Theory Validation Through Higher-Order Computation. M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2015. (Initial career placement: Product Engineer-Vehicle Engineering at Ford Motor Company, Dearborn, MI)
  22. Smith, Danis B., Reverse Thrust Certification as a Primary Ground Deceleration Device. M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2015. (Current Position: Engineer at Honeywell Aerospace, Phoenix, AZ)
  23. Mirochnitchenko, Vladimir, Wing-in-ground-effect Vehicle Concept Design, M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2015. (Initial career placement: Raytheon Missile Systems, Tucson, AZ)
  24. Dulin, Derek J., Fundamental Aerodynamics of Swept Wings, S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2015. (Initial career placement: Raytheon Missile Systems, Tucson, AZ
  25. Lemonds, Tyler, Automated Wing Structural Design,S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, December 2014. (Initial career placement: Textron Aerospace, Wichita, KS)
  26. Gedeon, Christopher, Energy Maneuverability of Combat Aircraft, M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2014. (Initial career placement: Honeywell Aerospace, South Bend, IN)
  27. Kady, Christopher, Aero-Structural Design of Transonic Wings, M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2014. (Initial career placement: Honeywell Aerospace, Phoenix, AZ)
  28. DeStories, Jason, “A Method for Optimizing and Evaluating Propeller Performance Established on Airfoil Test Data,” M.S. applied project, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2013. (Current Position: Boeing Helicopters, Mesa, AZ)

Barrett Honors Thesis Students

  1. Marino III, M.A, “Robust Autopilot Control of a Ground Vehicle,” ASU Barrett Honors College B.S. thesis, Mechanical Engineering, Arizona State University, Tempe, AZ, October 2022.
  2. Stauffer, M.T., “Generalized Propulsion Force Accounting,” ASU Barrett Honors College B.S. thesis, Aerospace Engineering, Arizona State University, Tempe, AZ, April 2022. (Initial career placement: Northrop-Grumman, Chandler, AZ)
  3. Walther, C. & Mazza, S., Automobile Drag Reduction through Vortex Generators, ASU Barrett Honors College B.S. thesis, Aerospace Engineering, Arizona State University, Tempe, AZ, April 2022.
  4. O’Brien, K. “An Investigation of the Bell X-2 and the Factors that lead to its Fatal Accident,” ASU Barrett Honors College B.S. thesis, Aerospace Engineering, Arizona State University, Tempe, AZ, November 2021. (Initial career placement: M.S. Candidate at ASU)
  5. Heitmann, K. “Analyzing Internal Stresses in a Dragon Boat Paddle to Optimize First Stroke Technique,” Aerospace Engineering, Arizona State University, Tempe, AZ, April 2021. (Initial career placement: Boeing, St. Louis, MO)
  6. Ranganathan, A. & Karthikeyan, S. “Exploration of Intercontinental Rocket Travel Using the Commercialization of the Airline Industry,” Aerospace Engineering, Arizona State University, Tempe, AZ, April 2021.
  7. Olzak, P. “Analytical Drag Analysis of Drafting NASCAR Models,” ASU Barrett Honors College B.S. thesis, Aerospace Engineering, Arizona State University, Tempe, AZ, April 2021. (Initial career placement: Honda R&D, Marysville, OH)
  8. Roden, M., “Dynamics of Oversteer: Modelling Drift by Solving a System of Equations,” ASU Barrett Honors College B.S. thesis, Mechanical Engineering, Arizona State University, Tempe, AZ, August 2020.
  9. Blair, M., & Armenta, F. “Modeling Trajectories of Supersonic Projectiles,” ASU Barrett Honors College B.S. thesis, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2020.  (Initial career placement: M.S. Candidates at ASU)
  10. Schierbrock, A. “Design of Tool to Predict Flight Envelope Properties,” ASU Barrett Honors College B.S. thesis, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2020.  (Initial career placement: M.S. Candidate at ASU)
  11. Kolesov, N., “Automated Generation of Aircraft Wing Structure,” ASU Barrett Honors College B.S. thesis, Aerospace Engineering, Arizona State University, Tempe, AZ, December 2019. (Initial career placement: Contractor at NASA/Ames Research Center, CA)
  12. Glynn, Julia, “An Experimental Investigation of Aerodynamic Drag on Different Cycling Outfits,” ASU Barrett Honors College B.S. thesis, Mechanical Engineering, Arizona State University, Tempe, AZ, December 2019.
  13. Jordan, A. Claire, “Theory vs. Practice: An In-Depth Analysis of Engineering Education and the Careers that Follow,” ASU Barrett Honors College B.S. thesis, Mechanical Engineering, Arizona State University, Tempe, AZ, May 2019. (Initial career placement: Texas Instruments, Dallas, TX)
  14. Goudamanis, Christy M. and Lai, E. “Future of Patentability for Biotechnology,” ASU Barrett Honors College B.S. thesis, BioMedical Engineering, Arizona State University, Tempe, AZ, May 2019.
  15. Sanchez, Z. “Effects of Diffusers With and Without Vortex Generators on Overall Flow and Velocity Distribution,” ASU Barrett Honors College B.S. thesis, Mechanical Engineering, Arizona State University, Tempe, AZ, May 2018. (Initial career placement: Cypress Semiconductors, Austin, TX)
  16. McCourt, A. “Aerodynamic Stability of a Small Bluff-Bodied Vehicle,” ASU Barrett Honors College B.S. thesis, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2018.  (Initial career placement: M.S. Candidate at ASU)
  17. Patrick, N. “A Tool for Parametric Modelling of Aircraft Landing Gear,” ASU Barrett Honors College B.S. thesis, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2018.   (Initial career placement: Northrop Grumman, El Segundo, CA)
  18. Morrow, M. “Leading Edge Geometry Effects on Pressure Drag and Pressure Thrust for Various Wing Geometries” ASU Barrett Honors College B.S. thesis, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2017. (Initial career placement: Ph.D candidate in Aerospace Engineering at Georgia Tech)
  19. Coote, P.J. “Investigation into the von Karman Vortex Street and the Relationship Between Reynolds and Strouhal Numbers,” ASU Barrett Honors College B.S. thesis, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2017.
  20. Leader, R. “Automatic Area-Ruling of Aircraft Geometries” ASU Barrett Honors College B.S. thesis, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2017. (Initial career placement:  M.S. candidate at ASU)
  21. Sparks, G. Philip “Planing and The Effect of Bicycle Frame Stiffness on Rider Performance” ASU Barrett Honors College B.S. thesis, Mechanical Engineering, Arizona State University, Tempe, AZ, May 2017.
  22. Elliott, S. “A Tool for the Parametric Modeling of Aircraft Bodies” ASU Barrett Honors College B.S. thesis, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2017. (Initial career placement: M.S. candidate at ASU)
  23. Brausch, M. “Wake Surveys behind Golf Club Heads” ASU Barrett Honors College B.S. thesis, Mechanical Engineering, Arizona State University, Tempe, AZ, May 2016. (Initial career placement: M.S. candidate at ASU)
  24. Milroy, M. “How Surface Roughness Contributes to the Overall Drag of Certain Spherical Objects.” ASU Barrett Honors College B.S. thesis, Mechanical Engineering, Arizona State University, Tempe, AZ, May 2016. (Initial career placement: Microsoft, Seattle, WA)
  25. Sexton, T., “Optimal Modeling of Knots in Wood: A study into the severity of wood-grain defects on beam stiffness,” ASU Barrett Honors College B.S. thesis, Mechanical Engineering, Arizona State University, Tempe, AZ, May 2015. (Initial career placement:  M.S. candidate at ASU)
  26. Creighton, A., “Analysis of Regulations on the Landing and Take-Off of Commercial Aircraft,” ASU Barrett Honors College B.S. thesis, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2014. (Initial career placement: Raytheon Missile Systems, Tucson, AZ)
  27. Duensing, J., “PID Control Techniques for the Autonomous Quadrotor and a Frequency Approach to Analyzing and Identifying Dynamic Models,” ASU Barrett Honors College B.S. thesis, Aerospace Engineering, Arizona State University, Tempe, AZ, May 2014. (Initial career placement: M.S. graduate studies in Aerospace Engineering, Arizona State University, Tempe, AZ)

Former Undergraduate Research Students Through NASA Space Grant

  1. Lucas Guaglardi – Design of Electric Ducted Fan Propulsors (Fall 2022, Spring 2023, Fall 2023, Spring 2024)
  2. Ryan Oppen – Structural Loads for UAS (Fall 2023, Spring 2024)
  3. Lina Youseffi – Aerospace Materials (Fall 2023, Spring 2024)
  4. David Ordaz Perez – Design of Rocket Recovery Parachutes (Fall 2021, Spring 2022, Fall 2022, Spring 2023)
  5. Dustin Eilers – Ramjet Propulsion System Design (Fall 2021)
  6. Cole Errico – Design of Launch Vehicle Structures (Fall 2020, Spring 2021)
  7. Sepideh Jafarzadeh – Rocket Nozzle Testing (Fall 2014, Spring 2015)

Former Undergraduate Research Students Through the Fulton Undergraduate Research Initiative (FURI)

  1. Lucas Van Noord, Aircraft Mass Properties Estimation (Spring 2023)
  2. Zak Norris, Aircraft Structural Joints (Spring 2022,Fall 2022)
  3. Jack Griffin, Aircraft Structural Mass Estimation (Spring 2021)
  4. Ivan Pesquiera, Carbon Fibre Aircraft Structures (Spring 2021)
  5. Kevin O’Brien, Flight Dynamics of Small Aircraft (Spring 2020, Fall 2020)
  6. Nitish Chennjou, Flight Test Data Reduction (Spring 2020, Fall 2020)
  7. Maxwell Stauffer, In Flight Propulsion Testing (Spring 2020, Fall 2020)
  8. Nikolay Kolesov, Lightweight Structural Design for Strength and Buckling Resistance, (Fall 2018, Spring 2019)
  9. Daniel Kosendar, In Flight Propulsion Testing (Spring 2019, Fall 2019)
  10. Evan Barker, Wind Tunnel Propulsion Testing (Spring 2019)
  11. A Claire Jordan, Thermally Induced Buckling of Aerospace Structures, (Spring 2018, Fall 2018)
  12. Ivan Milosavljevic, Aircraft Flight Operations (Spring 2017, Fall 2017)
  13. Matthew Bajamundi, Electric aircraft propulsion (Fall 2017)
  14. Galen Kingsley, Leading Edge Suction Investigation through Wake Surveys (Fall 2017, Spring 2018)
  15. Erik Krutchen, Aircraft Flight Operations (Spring 2017)
  16. Ivan Kruts, Propeller testing (Fall 2016, Spring 2017)
  17. Robert Leader, Parametric CAD of supersonic aircraft (Spring 2016, Fall 2016)
  18. Edgar Castillo, Wake Survey Probe (Fall 2015, Spring 2016)
  19. Aaron Molina, Wake Survey System (Fall 2015, Spring 2016)
  20. Tanguy Toulouse, Propeller Thrust Stand Fixture (Fall 2015, Spring 2016)
  21. Steven Elliott, Parametric CAD of subsonic aircraft (Fall 2015, Spring 2016)
  22. Michael Benassi, Advanced Materials / Aviation Safety Public Policy (Fall 2014, Spring 2015)
  23. Eric Chang, Materials & Fabrication Techniques for Small UAV (Fall 2014, Spring 2015)
  24. Garrett Heuer, Field Performance / Aviation Safety Public Policy (Fall 2014, Spring 2015)
  25. Eric Horton, Flight Operations / Aviation Safety Public Policy (Summer 2014, Fall 2014)
  26. Andrew Creighton, Runway Excursions / Aviation Safety Public Policy (Fall 2013, Spring 2014)
  27. Matthew Swann, CAD Integrated Analysis (Spring 2013, Fall 2013)
  28. Derek Dulin, CAD Integrated Aerodynamic Analysis (Spring 2013)
  29. Zachary Branum, CAD Integrated Aerodynamic Analysis (Spring 2013)